Do it yourself carpet repair & rug cleaning can help save your carpeting. In some cases, you will need to have professional carpet repair in Grand Prairie do the job. However, to help you save your carpeting and rugs, here are some tips from carpet repair & rug cleaning experts.
- Patch Areas that are Stained Burned or Ripped
Stains are one of the most common reasons why carpet repair in Grand Prairie is required. Patching is not as hard as it sounds, but you will need to have all the necessary tools handy. You will need scissors, utility knife, gloves, carpet tape, and a cylindrical object that is larger than the stain. You will also need extra carpet, so you can use some carpet from inside of the closet.
To patch the area, you just need to use the cylindrical object to cut around the damaged area and the patch. Then lay down the carpet tape, place the patch, and make sure that the fibers are going the right way. You may need to trim the patch once it is in place. To make sure that the patch stays in place, put a heavy stack of books or piece of furniture on top of it.
- Trim the Carpet if the Stain or Burn is Not Deep
If the stain or the burn mark does not go down that far, you can just take scissors to cut off the damaged fibers. Try not to cut down too far because the carpeting will look odd.
- Fixing Snags
Snags can happen in long fiber carpeting. Fixing snags does take time because you will need to examine the carpeting to see what caused the snag and determine how to remove it. Try to avoid cutting the snag because you can make a hole in the carpeting. You will also need a small tool like a knitting needle or a thin pencil to pull the thread or the fibers back into the carpeting.
- Stop Lifting
Carpet lifting can be caused by a number of different reasons. However, it is simple to fix by yourself. The first step is to remove the furniture from the room. You will need to loosen all the tack strips and slowly lift the carpet.
Check the padding underneath because if it is bunching, it will cause the carpeting to lift over usage. Then stretch out your carpeting and place it back down, and make sure that you pull it as tight as possible. You may need to replace the tack strips if they are damaged or worn down. Trimming of the carpet may also be needed, depending on if the carpet is too large for the room. This should be done with a utility knife or a sharp pair of scissors, and you should seal the edges with edge sealer after trimming.
Simple carpet repair & rug cleaning can be done using items in your home or machinery that you can easily rent. If major carpet repair & rug cleaning is needed, you should hire a professional in carpet repairs in Grand Prairie.
